GMDE GHESS 5.0_6.0KWH, Инструкция по установке и эксплуатации

Страница: 7 / 20

2.3 Output Connectors Illustration
Viewing from the back side of the cabinet, at the bottom of the cabinet, you can find the output
connectors, as shown in Figure 4.
Figure 4 Output connectors
3. Installation
The system is very easy to install. Insert the battery modules and hybrid inverter into the system
cabinet according to the following steps in Section 3.2 Install the battery packs and Section 3.1
Install the inverter; finish the output line connection according to Section 3.3 External Line
Connection; check and then the system installation is done.
3.1 Install the inverter
Please follow these steps to install the inverter into the system cabinet:
1) Align with wall bracket, move Powervortex 305KTL hybrid inverter in horizontal direction to
proper position;