GMDE GHESS 5.0_6.0KWH, Инструкция по установке и эксплуатации

Страница: 18 / 20

5. Trouble Shooting
5.1 Fault Messages and Action List
When failure occurs, warning codes will be displayed on the touch screen. The latest 20 fault
codes will be stored in the EEPROM. Check the history fault information via the touch screen.
Detailed fault definitions are listed as below:
Item Fault Message Action List
1 Offset Iac Warning
Re-start the system and if not released, contact your seller for
service support.
2 ENS Mess Warning
Re-start the system and if not released, contact your seller for
service support.
3 ENS GFCI Warning
Re-start the system and if not released, contact your seller for
service support.
4 AC Sensor Warning
Re-start the system and if not released, contact your seller for
service support.
5
Inverter Curr
Warning Re-start the system and if not released, contact your seller for
service support.
6 GFCI Warning
Re-start the system and if not released, contact your seller for
service support.
7 GFCI Device Warning
Re-start the system and if not released, contact your seller for
service support.
8 Zpv PE Warning
Re-start the system and if not released, contact your seller for
service support.
9 Rly Warning
Re-start the system and if not released, contact your seller for
service support.
10 Vac Warning
Re-start the system and if not released, contact your seller for
service support.
11 Fac Warning
Re-start the system and if not released, contact your seller for
service support.
12
External Comm
Warning Re-start the system and if not released, contact your seller for
service support.
13 No Utility
Re-start the system and if not released, contact your seller for
service support.
14 VdcMax Warning
Re-start the system and if not released, contact your seller for
service support.
15
Master Slave
Warning Re-start the system and if not released, contact your seller for
service support.
16
Temperature
Warning Re-start the system and if not released, contact your seller for
service support.