GMDE GEatom 315/318KTL
Global Mainstream Dynamic Energy Technology Ltd.
25
Pin No.
Illustration
1
-
2
-
3
Data+
4
GND
5
GND
6
Data-
7
5V
8
5V
Table 4 RJ45 plug pins illustration
B-USB port:
Figure 18 Insert the USB cables
*Note: The B-USB port will only be used for software update.
*3.4.5 Power Meter Installation
(This section is only for the Integrated Energy Management Solution in section 2.1 General System
The wire connection of power meter is shown as below:
1)
Connect the AC grid to the power meter on the “↑” marked side. Connect the load on the other
side. Pay attention to the Neutral line connection.
2)
Connect the RS485 cable to the power meter according to section 3.4.4 Communication Interface
Port: connect the terminal “7” with the pin 3 Data+; connect the terminal “8” with the pin 6
