GMC Defense 2006, Дополнение к руководству пользователя

Страница: 78 / 116

5-35
A (Tire Button): Press this button to program the
system.
B (Set Button): Press this button to save a setting
and to exit and return to the normal display view.
C (Mode Button): Press this button to enter different
modes of the programming operation.
Notice: Driving when a TPM system alert or
warning condition is detected, may cause tire
damage. This damage would not be covered by
the vehicle warranty. Reduce vehicle speed to an
appropriate safe level and proceed to a safe
stopping location or facility where the tire can be
inspected and serviced.
Gage Function
When power is applied to the receiver, the gage
display momentarily turns on all icons, beeps, and
the gage backlight blinks once. The unit then goes
into standby mode waiting for data from the wheel
transmitters.
Note: Until the vehicle is in motion no data will be
received from any installed transmitter. The display
will remain blank.
J (Cold Pressure Indicator): This message will
indicate that the numerical display is cold tire
pressure.
K (Tire Rotation Program): Press this button after
the tires have been rotated and the new position
needs to be updated.
Tire Pressure Monitor System
Switch Panel
The switch panel is located on the instrument panel
next to the steering column. The switch panel’s
function is to program or select certain functions of
the system.