GMC Acadia Denali 2012, Руководство пользователя, Страница: 291 / 456

Black plate (37,1)
GMC Acadia/Acadia Denali Owner Manual - 2012
Driving and Operating 9-37
When the System Does Not
Seem To Work Properly
The rear vision camera system
might not work properly or display a
clear image if:
. The RVC is turned off. See
“ Turning the Rear Camera
System On or Off ” earlier in
this section.
. It is dark.
. The sun or the beam of
headlights is shining directly into
the camera lens.
. Ice, snow, mud, or anything else
builds up on the camera lens.
Clean the lens, rinse it with
water, and wipe it with a soft
cloth.
. The back of the vehicle is in an
accident. The position and
mounting angle of the camera
can change or the camera can
be affected. Be sure to have the
camera and its position and
mounting angle checked at your
dealer.
. There are extreme temperature
changes.
The rear vision camera system
display in the rearview mirror may
turn off or not appear as expected
due to one of the following
conditions. If this occurs the left
indicator light on the mirror will
flash.
. A slow flash may indicate a
loss of video signal, or no video
signal present during the reverse
cycle.
. A fast flash may indicate that
the display has been on for the
maximum allowable time during
a reverse cycle, or the display
has reached an Over
Temperature limit.
The fast flash conditions are
used to protect the video
device from high temperature
conditions. Once conditions
return to normal the device will
reset and the green indicator will
stop flashing.
During any of these fault conditions,
the display will be blank and the
indicator will continue to flash as
long as the vehicle is in R (Reverse)
or until the conditions return to
normal.
Pressing and holding
z
when the
left indicator light is flashing will turn
off the video display along with the
left indicator light.