Pairing:
Pairing varies among devices but basic steps are the same. This process is
done upon initial install and will not have to be repeated.
1.
Turn ignition and r
adio “ON”
Blue LED through module peephole will flash (pairing mode)
2.
On A2DP device: go to
Bluetooth Settings
3.
Select
Bluetooth
and turn on
4.
Tap
Scan for devices
.
5.
Wait for Bluetooth device name (LANNI) to appear and tap it.
Once
paired Blue LED through peephole will blink once every 3 seconds and
confirmation tone is heard on car speakers
One connection
The A2DIY-GM1 connects to one device at a time. First device must be
disconnected in order to pair a second device or simply turn OFF Bluetooth on
first device.
Warning!
Voice recognition (VR) applications (e.g., Siri, Google Play etc.) must
be enabled on device as you would in portable mode.
Bluetooth Media button
Pairing media button:
Ensure Bluetooth is enabled on your device (e.g.,
Smartphone/Tablet etc.) scan/search for available devices and select BT009
from list. Media button can be paired with multiple devices but can only operate
one at a time.
Fig. 16
Installing media button:
Attach button to steering wheel (includes holder) or dashboard to safely and
conveniently control multi-media functions even when smartphone is out of
reach
.
Charging Media Button:
Media button has a built-in rechargeable 200mAH battery which may last up to
10 days. Use supplied USB cable to connect media button to charging source.
Reaches full charge after 2 hours.