6.
Auxiliary input connection
: Connect supplied 3.5mm audio cable (See
Fig. 4
) to module
“AUX”
jack (See
Fig. 3
). Route cable other end to
front of dash or wherever Aux device will reside (within 3 ft.)
Fig. 4
7.
Install microphone (See
Fig. 5
) to vehicles visor or headliner using
included visor clip (See
Fig. 6
).
Fig. 5
Microphone
Fig. 6
Visor clip
8.
Carefully route microphones 1/
8” plug
down pillar and behind the dash
and plug into module
“MIC” input
jack (See
Fig. 3
)
Fig. 7
Optional USB “Fast Charge” Kit
(not for thumb drives etc.)
This fast charge USB kit can be added to any vehicle. It supports BC1.2, QC2.0,
QC3.0, PE1.1, PE2.0, FCP, SFCP fast charge protocols (Apple, Samsung, Huawei
etc.)
Note:
iPhone "Fast charge" kicks in when battery capacity is between 0-79%,
and return to regular charge mode when it reaches 80%.
Should you decide on this add-on, we suggest one of 2 connecting options:
A
.
Flush to dash/panel requires drilling a ¾” hole
B
.
Flush with support bracket
(Mount USB terminal wherever your installation
demands without drilling)
A.
Flush to Dash or Panel
(requires drilling)
1.
Drill a ¾” hole in the dash or panel using a step drill bit or equivalent
(See
Fig. 8
)
Fig. 8
Step drill bit