2.
Insert USB male cable terminal (See
Fig. 9
) through
¾” hole created in
step 1 and connect to module USB charging port (See
Fig. 10
)
Fig. 9
USB cable with bracket
Fig. 10
charging port
3.
Snap USB cable head (See
Fig. 11
) to mounting surface (See
Fig. 12
)
Fig. 11
USB head
Fig. 12
Flush mounted to dash
4.
Tuck and secure any extra wire from moving parts and test operation
(See
Enabling the AUX
section below)
B.
USB with Bracket Mount
(No drilling)
1.
Locate flat surface at location of choice within 3.2 ft. of radio and
mount USB support bracket (See
Fig. 13
) to surface using
adhesive/tape or screws.
Fig. 13
USB mounting bracket
2.
Insert USB cable male terminal (See
Fig.14
) through hole in bracket
and connect to module USB charging port (See
Fig. 10
)
Fig. 14
3.
Snap USB cable head in place until flush (See
Fig. 15
)
Fig. 15
Tuck and secure any extra wire away from moving parts and test operation (
See
Bluetooth Pairing and Connection