GUARANTEES AND SERVICE
The owner of a GM Autoflow water softener is protected by the following guarantees,
which include the right to exchange or repair in the case of a manufacturer’s defect for up
to:
1 year on valve
5 years on brine tank or cabinet
5 years on resin vessel
The guarantees are under condition that the softener is installed according to local
regulations and to the manufacturer’s instructions as specified below:
1) It is very important that the water temperature of 50 centigrade for CW Series (cold
water) and 65 degrees for HW Series (hot water) is never exceeded.
2) There must always be suitable salt in the brine tank.
3) The electrical supply must never be switched off.
4) After a power outage the programmer timer must be re-adjusted (timer models only)
5) The inlet and outlet valves must always be open. The by-pass valve must always be
closed.
Tel - 0845 10 80 680
Email - [email protected]
www.gmautoflow.co.uk
