6
Control computer
USB
VPS
-
F2L4
Controller
DVI input
Signal divider SDV
Main signal A1
Backup signal A2
LED Screen
Optical fiber signal
input to OUT1
Main signal B1
Backup
signal B2
Step2: Software Parameters Setting
As the resolution of OUT1 port and OUT2 port is 1024×384 ,we can calculate W=1024
，
H=384
according to the signal horizontal segmentation of the VSP-F2L4 controller.The parameter interface showed
as below:
Step3: Addresses Setting of Signal Divider
We can only use intelligent setting method to set the addresses as there is a signal divider in this project.
Set the addresses of main signal first, and then set the addresses of backup signal ,At last use both main
signal and backup signal simultaneously in your project.
