Glutz SD-L F 9365 Series, Монтаж и эксплуатация

Страница: 13 / 112

SD‑L F (9365x)
0548-988-11---20_2022.01.indd
0548-988/12
Page 13 of 87
Mounting and operating instructions
* For obtaining
the protection
type IP 42, the
drive mechanism
covering must be
sealed all around!
Sealing compound
e.g. 6450-105
Adhesive tape
transparent
3.6 Technical data
Drive mechanism Standard
SRP (special gear for sliding rods pushing
function)
Power transmission Normal rods
Sliding rods
Dimensions drive mechanism Height 95 mm
Width 690 mm
Depth 120 mm
Weight drive mechanism 10,5 kg
Ambient temperature -15...+50 °C
May only be used in dry rooms max. relative humidity 85 %
Protection type IP 40 (IP 42*)
Operating voltage 230 VAC (+10/-15 %), 50 Hz, 10/13 A
Power consumption drive mechanism max. 560 W
Motor power rating 100 W
Power supply external comsumer 24 VDC (±10 %), 2 A
Torque output shaft 80 Nm permanent
240 Nm max.
Distance Door hinge - Output shaft all 280 mm
Lintel depth Normal rods RS pushing funct. 0...240 mm
Slid. rods RG pulling function -30/+110 mm
Slid. rods RG push. function -30/+40 mm
(DIBt tested -30/+30 mm)
Door opening angle max. 105°
Weight of door leaf max. 250 kg
Width of door leaf EN 3...6 (851...1'400 mm)
Opening speed 2,4...20 s adjustable (max. 40°/s)
Closing speed 2,4...20 s adjustable (max. 40°/s)
Foreceful closing range (without mains power) 5...15° stepless adjustable (mechanical)
Forceful closing cushioning (without mains power) stepless adjustable (adjusting trimmer)
Hold-open time 0...60 s
Hold-open time Night 0...180 s