Glue Machinery Corporation
Champ™ Stick 400 Manual
Part # G25E03-001
Glue Machinery Corporation™
4234 Boston St, Baltimore, Maryland 21224
Toll Free 1-888-202-2468 | Phone: 410-761-2727 | Fax: 410-761-5127 | Email:
www.gluemachinery.com
Read all Safety Instructions
:
Work area
. This tool was designed to be used on a clean, dry work surface. Excessive dust
and dirt may reduce the lifetime of this tool. Do not use in wet or damp locations. Your work
areas should keep well lit.
This tool is recommended for indoor use only
. Do not use outdoors.
Keep children away
. Small children should be kept away from work area. Accidental contact
with tool or extension cord should be avoided.
Glue gun storage
. After use, allow glue gun to cool completely prior to storage. When not in
use, the glue gun should be stored in dry and secure location out of the reach of children.
Electrical cord precautions
. Do not carry the tool by the cord or yank to disconnect from the
receptacle. Keep the cord away from the nozzle or other high heat sources. Periodically
inspect the electrical cord for any sign of wear or damage.
Disconnect electrical power
. When not in use, before servicing, and when changing. Do not
yank on cord to unplug from electrical receptacle.
Stay alert
. Pay attention to your work. Beware of any dripping hot glue from your project. Use
common sense. Do not operate this gun when you are tired. Do not operate under the influence
of alcohol or other drugs that may impair your physical abilities.
Do not touch the heated nozzle of the glue gun or the hot adhesive
. The operating
temperature of this tool can be as high as 446°F (230°C).
Use recommended accessories
. Use only recommended adhesives in this glue gun. Putting
other materials than recommended may result in accidental injury and permanent damage to
the glue gun. For example: do not attempt to melt crayons or candles.
Never use the tool if it is damaged in any way.
Hot melt adhesives are not a replacement for structural fastener
.
Hot melt glue should not be used for projects that will be exposed to extreme heat
. Some
adhesive used with this glue gun can soften at about 140°F.
*Do not attempt to remove unused portion of a glue stick from the tool.*
Do not expose the glue gun to extreme changes in temperature during or directly after use.
Never immerse glue gun in water or other liquids to speed cooling process. Allow the gun to
air cool only.
Children should use this glue gun only under the direct supervision of a responsible adult.
Do not leave the glue gun unattended while plugged in or in a hot condition.
Make sure to have sufficient eye protective wear, like full mask, in order to avoid
damaging materials entering and causing long lasting effect to eye area, during use.
Use of Hot Melt Sticks with a diameter other than 11mm will damage the gun
