background image

4

1. Remove all ornaments and decorations. For pre-lit trees, first unplug adapter from the 

wall outlet and then disconnect light extension cord between each section of the tree.

2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift 

straight up to remove from section below and fold all branches toward the pole.

3. In case of difficulty separating the tree pole (trunk), apply a small amount of lubricant at 

the joint and rotate the upper pole in both directions. Lift up the upper pole again.

4. Continue by gently lifting straight up each section(s) from the section below and fold all 

branches toward the pole until the bottom section is removed from the tree stand.

5. Carefully place all tree sections into shipping box and tape it shut.

6. When not in use, please store your tree in a cool, dry place away from sunlight. 

Exposing your tree to excessive heat or humidity may damage your tree.

STORAGE INSTRUCTIONS

 For Pre-lit Trees, If The Tree Does Not Illuminate

1. Please check to make sure that all plugs are properly connected and power cord is plugged into 

the wall outlet. (If the tree comes with a foot pedal, try stepping on the on/off button).

2. Turning the poles gently to make sure pole to pole are connected into place.
3. Please check for loose, broken or missing light bulbs and replace as needed.

Loose Hinge Pin

1. Extra hinge pins are included for repairing the hinges. Place the branch into the slot of the bracket.
2. Insert a new hinge pin through the hole and secure using the retainer washer. 

(See Fig. D)

TROUBLE SHOOTING TIPS

Fig. D

MODEL #: TG70M3BACL00

WARNING

1. To reduce the risk of fire and electric shock:

a) Use only the power supply that was provided with this product;
b) Do not install on trees having needles, leaves or branch covering of metal or materials which look like metal;
c) Do not mount or support strings in a manner that can cut or damage wire insulation.

2. Use only the adaptor supplied with this product. Using a different adaptor will damage the lights

and may cause fire,or electrical shock hazards.

3. For Indoor Use Only.
4. The external flexible cable or cord of this tree cannot be replaced.  If the cord is damaged, the luminaire should be destroyed.

Each tree includes hinge pins/washers, spare bulbs are included for pre-lit trees. 

If extra parts are needed, please contact our customer service center at:  1-800-521-2364

SPARE PARTS

Содержание TG70M3BACL00








Отзывы: