3
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface.
(See Fig. A)
Carefully follow the instructions below on how to quickly and easily set up your new tree.
TREE ASSEMBLY INSTRUCTIONS
3. Each tree section is numbered with a tag. Please identify all sections before assembling.
4. Assemble the tree from bottom to top. Start with the bottom section and remove the protective cap before inserting it into the
assembled stand. Make sure the pole is firmly inserted and secured into the stand.
5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.
6. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all branch hinges are free of wires.
7. Insert the plugs into the extension cord as per colour labels indicated.
(see Fig. B )
, Then turn to lock in place. Plug the Adaptor,
connected with the Green labeled extension cord, into the wall outlet. Your entire tree should now be lit. If some bulbs do not light or
flicker, search for any loose plugs and/or broken, loose or missing bulbs. Connecting the plugs or replacing the bad bulbs promptly
helps to maintain the performance and life expectancy of your pre-lit tree.
8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from
the pole and fan out one to the right, one to the left and one at the centre of the main stem.
(See Fig. C)
9. After shaping the entire tree by following the previous steps, lightly upsweep all branch tips for a uniform look. Shift branches to fill
any gaps. Your Christmas tree is now complete and ready to be decorated.
Top view
Side view
Fig. C
MODEL #: TG70M3BACL00
*Electrical Rating For The Tree
(For Indoor Use Only)
Input: 120V, 60Hz, 0.16A
Output: 28V DC 0.28A
Adaptor Model Number: TS-8W28V
FIG. B
Tree and Light
Assembly
Tree Top
Section 2
Section 1
FIG. A
Tree Stand
Assembly
Pull apart the legs of the stand so that they are
snapped into an x-shape,
place the tree stand on a level surface.
To close the stand,
press the metal button and fold the
legs together.
Click
Adaptor
To Be Plugged
Into Wall
Outlet
Insert GREEN Label
Plug into Adaptor
Adaptor
Model Number:
TS-8W28V
Insert
Red
Label Plugs
Into
Red
Labeled Extension Cord
