4
1. Locate battery compartment on the product.
2. Remove compartment cover by unscrewing it with a screwdriver.
3. Insert 3 pcs AA battery as indicated in diagram below.
Make sure the batteries are inserted in the correct direction and polarity.
4. Replace compartment cover, re-insert screws & tighten. If the lights did not turn
ON, press the ON/OFF button.
5. BATTERIES ARE NOT INCLUDED.
6. DISPOSE OF USED BATTERIES PER MUNICIPAL OR PROVINCIAL LAW.
INSERTING THE BATTERIES
This battery operated control box comes with a pre-set timer function.
1. When you press on, the lights will automatically come on and stay lit for 6 hours.
2. The lights will automatically turn off after the 6 hours and remain off for 18 hours.
This cycle will then continue until you press off.
1. Do not mix old and new batteries (or different types of batteries). Do not mix alkaline, standard
(Carbon - Zinc), lithium, or rechargeable (NiCd, NiMH or other type) batteries.
2. Remove batteries when not used for an extended period of time, or when depleted.
3. Dispose of used batteries properly by following directions on batteries.
4. Clean the battery contacts prior to battery installation.
5
．
Caution - when replacing the batteries, you must only replace with AA type batteries.
6
．
Indoor / Outdoor use.
7. WARNING: SMALL PARTS, KEEP AWAY FROM CHILDREN.
8. Do not expose light set to standing moisture.
9. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK.
OPERATING INSTRUCTIONS
WARNING
MODEL # : TV46M2ANOL04
FIG.2
FIG.1
ON
OFF
