NOTE: DO NOT USE ANY ADDITIONAL CHRISTMAS
LIGHTING OR ORNAMENTATION THAT IS POWERED BY A
LIGHT BULB SOCKET. DOING THIS MAY RESULT IN DAMAGE
TO THIS PRODUCT OR CAUSE PERSONAL INJURY. THIS
ACTION WILL RESULT IN A VOID OF THE LIMITED
WARRANTY OF THIS PRODUCT.
1. Leave assembled if storage room permits or disassemble,
placing all components in the original carton.
2. Store in cool, dry location away from sunlight.
STORAGE INSTRUCTIONS
NOTE: Check the item for any loose, unlit or damaged
bulbs. Although it will still operate, the bulbs must be
replaced promptly to ensure the performance and life
expectancy of the item.
1. If the sculpture fails to light; unplug the product and check
to see that the GFCI outlet is functioning.
2. If a section fails to light, leave the product plugged in and
check all light string connections. This product uses
coaxial connections to connect the light strings; align the
male end to the female connectors as shown and connect
them together. Slide the cover from the “male” connector
over the “female” connector and tighten.
TROUBLESHOOTING
NOTE: Replacement bulbs are provided; this is a specialty
LED bulb. Do not attempt to replace with a standard LED
or incandescent bulb. Should you require additional bulbs
please contact our customer service department.
CCT18
ASSEMBLY OF THE WREATH
1. Place 6 sets of washers & bolts at the designated locations
(Fig 3). Tighten all 3 sections together by using 2 Bolts and
washers between each section.
Fig 5
2. Next you will need to make all the coaxial connection points.
Screw the coaxial connections between 1st and 2nd piece and
then between 2nd and 3rd piece (Fig 4).
Note: On the 3rd piece there is a female coaxial which will
have end cap sealing it this is normal and will not connect to
anything.
4. To illuminate fully insert the plug into a working GFCI outlet or
an outdoor rated extension cord.
3. Plug the connection wire on to the 1st piece.
You have completed the assembly of the wreath (Fig 5).
Fig 2
Model No. 4723262-C29HO1/4723262-30HO1
Made in China
Printed in China
This is not a toy, for decorative use only.
DISTRIBUTED BY HOME DEPOT U.S.A., INC. 2455
PACES FERRY RD., N.W. Atlanta, GA 30339 All rights reserved.
This product was pre-tested before shipment and date
coded. In keeping with the National Electric Code, this
product is intended for seasonal (90 days max.) installation
and use. For problems or questions on this product call
Home Depot customer service toll-free at 1-877-527-0313.
Fig 3
Fig 4
ASSEMBLY INSTRUCTIONS
(We recommend wearing proper clothing in order to prevent
scratches that may occur during the assembly process.)
Carefully unpack all Wreath components from the carton (Fig 1).
Your Wreath should include the following:
3 pieces of wreath (Fig 1).
6 sets of washers & bolts (Fig 2).
1 Bag of replacement LED bulbs and fuses.
Fig 1
Replacement LED bulbs
and fuses
11.5”
2018 Home Depot.com
60in Wreath - Instruction Sheet (English)
Date: 3/12/18
11.5”
Item # 4723262-C29HO1
4723262-30HO1
