GLP German Light Products
X4 Atom Head manual (v1.0)
from software version: 8
7
3.1
Operating on the Floor (Upright)
The
X4 ATOM
can easily be fitted with the included floor-stand which allows
a stable standing of the fixture.
It is fixed to the Atom head by simply sliding it into two opposite connector
sockets on any side of the fixture. Make sure so secure them both with the
latch.
To release it again press the buttons to open the latch and slide the
connectors out of the sockets.
An additional securing is usually not required. Please pay attention to an
even and gripping surface.
3.2
Mounting in a single hanging or sideways position
Buttons to release the latch
To operate one
X4 ATOM
in a hanging
position please use the dedicated yoke
supplied with your fixture. And attach it to
the fixture as described above.
Use a half-coupler (clamp or hook) to hang
the fixture from a dedicated truss
