GLP German Light Products
X4 Atom Head manual (v1.0)
from software version: 8
9
3.4
Securing the Fixture
Regardless of the mounting method of the
X4 ATOM
you'll have to use a
stipulated safety wire. Attach the safety wire through the attachment point
at the back of each fixture.
The safety attachment point can be deployed by simply swinging it out from
the back as shown below.
Pay attention to a safe and proper fastening. The safety cable must comply
with BGI 810-3 (EN 60598-2-17 Section 17.6.6) and be capable of bearing a
static suspended load that is ten times the weight of the fixture and all
installed accessories.
safety attachment point
