GLP impression FR1O BAR, Быстрый старт и руководство по безопасности

Страница: 12 / 28

www.glp.de
12 impression
FR10 Bar Quick Start and Safety Manual Rev. A
4. Features
The impression FR 10 Bar from GLP can be used in dry locations in permanent and
temporary installations. Fixtures can be placed on or fastened to a level surface, or
they can be suspended from a suitable structure as directed in this manual.
Power and data can be daisy-chained for ease of installation, and multiple fixtures
can be lined up to give an unbroken line of pixels using the retractable alignment pins
that are built into the fixture.
The FR 10 Bar is not suitable for household use, for use in any location where
unattended children have access to it, or for use in locations that may be exposed to
water or humidity.
User Manual
This Quick Start and Installation Manual gives a very basic overview of control options
and functions. See the FR 10 Bar User Manual available for download from www.glp.de
for full details of control, pixel layout, etc.
Tilt lock
Important! Before transporting the FR10 Bar, release the
tilt lock and make sure that the head is supported to
prevent it from moving.
The FR10 Bar has a tilt lock that can be used to prevent
the head from moving while the fixture is being
carried. The tilt lock also lets you immobilize the head
during cleaning or while installing optical accessories
on the front of the fixture.
See Figure 3. The tilt lock button is located on the back
of the head, at the left-hand end of the head when
viewing the fixture from the control panel side. To
engage the tilt lock:
Check that power to the fixture is shut down.
Move the head into the upright position, facing
away from the fixture base.
Slide the tilt lock button towards the yoke and into
the
Lock position to engage it.
Release the tilt lock by sliding it away from the yoke and into the Unlock position
before reapplying power to the fixture.
Figure 3. Tilt lock button