Glomex PANDORA V8001, Руководство пользователя и инструкция по установке

Страница: 45 / 172

URANIA 2 V9331 - PANDORA V8001 - RHEA V8100
43
ENGLISH
www.glomex.it
3.1 OPTIONAL ACCESSORIES (NOT INCLUDED) TO USE GLOMEX ANTENNAS
To be able to use your new GLOMEX satellite
antenna for boats, you will have to procure or buy
also:
- a TV set; - a satellite receiver for channel selection.
The table below lists all the GLOMEX optional
components, with relevant code.
4. NECESSARY TOOLS FOR
ASSEMBLY (NOT PROVIDED)
Procure all tools and materials listed below. They
will be necessary to complete installation.
- Electric drill (1).
- 8.5 mm drill tip for radome assembly (2).
- 28 mm hollow mill for drilling the passage hole
for the antenna connector cable (3).
- Phillips screwdriver (with adequate dimensions
for control unit installation) (4).
- 11 mm wrench (for the installation of the coaxial
cable connectors) (5).
- Reciprocating saw (to create the compartment
in case of wall built-in installation of the control
unit; use the template provided on page
51 ) (6).
S
WARNING
Plan the whole installation before proceeding!
Please consider the lay-out of the various compo-
nents, the distance between them, the length of the
various cables and the accessibility to the equip-
ment once it is installed.
S
WARNING
Always lift the antenna from the lower radome and
never from the upper radome or any part inside it.
Optional accessory GLOMEX code
Satellite decoder i-CAN 1110SV TIVÙSAT 230 VAC
- 12 VDC
V9193
XDome terrestrial digital - satellite HD combi
decoder (DVB-T + DVB-S + DVB-S2) compatible
with SKY ITALIA - 230 VAC
V9192
Line amplifier V9115
SD card with new satellite 4.120.0077
SD card with software update 4.120.0078
Stainless steel support 0°- 5° V9500
Twin radome V9331 TWIN/V8001 TWIN/V8100 TWIN
Radome painting - RAL colour chosen by the
customer
SATPAINT
Line amplifier V9115
Fig. 2
Upper radome
Lower radome