Page 10
•
ALWAYS
unplug the induction range and wait for it to cool completely before cleaning.
•
DO NOT
use any cleaning fluids that can be harmful to you, others around you, or to the environment.
•
DO NOT
hose down, immerse or pressure wash any part of the induction range.
•
NEVER
use a scrubber pad, steel wool or abrasive material to clean the induction range.
BEFORE CLEANING, ALWAYS DISCONNECT OR UNPLUG THE ELECTRICAL POWER TO THE
INDUCTION RANGE.
RECOMMENDED CLEANING
It takes very little time and effort to keep the induction range attractive and performing at top efficiency. Clean after
each use according to the cleaning schedule below:
PART
REQUIRED ACTION
FREQUENCY
Induction
range glass
top
Wipe down the unit with a damp cloth (DO NOT use Benzene, thinner,
scrub brushes or polishing powder to clean any surface on the induction
range.)
Note: If pots/pans are used without being cleaned first, staining of the
glass top may result.
After each use
Body
Wipe down the unit with a damp cloth (DO NOT use benzene, thinner,
scrub brushes or polishing powder to clean any surface on the induction
range.)
Daily
Controls
Unit should be turned off when not in use.
It is recommended that the unit power be shut off and disconnected from
the power supply (the outlet)
Use a clean, damp cloth to wipe down the control panel.
Daily
Intake and
exhaust vent
Once the unit has cooled, use a vacuum attachment to remove dirt and/
or debris from the intake and exhaust vents.
When needed
NEVER
run water over the unit.
DO NOT attempt to repair or service this unit yourself. Call an Authorized Servicer to
perform repairs and/or service this unit.
Cleaning Instructions
