Assembly manual
Black Snapper L PRO
Seite
13
von
16
When the frame is closed, the CoG of the copter needs to be adjusted by moving the battery, battery extension plate
and the gimbal mount. Tighten all screws when you are finished.
From the mechanical point of view, the aircraft is now ready for the maiden flight.
The final step is to adjust the final settings in the Naza V2 Assistant software. You can find a screenshot of gain
values for reference at the end of this manual. Furthermore you have to enter the position of the GPS antenna, set
the low voltage values and RC transmitter switches. Please see the Naza V2 manual for further information.