Assembly manual
Black Snapper L PRO
Seite
12
von
16
It is recommended to protect the GPS cable part which is threaded through the plate from damage with a piece of
heat shrink tube.
The final position of the gimbal mount and of the battery plate extension can only be adjusted when the aircraft is
fully assembled, so you only need to tighten the screws slightly at this point.
The arrow of the GPS antenna must point exactly to the front of the aircraft. Arrow and notch on the antenna have
to be exactly parallel to the middle axis of the center frame.
Mount the battery plate to the frame using the rubber dampers, attach the gimbal and plug the cable in. You can
also use the Anti Drop or cable ties to prevent the gimbal dampers from slipping out.
