1
3
0
x
1
6
5
3
5
0
x
2
9
0
3
2
0
x
2
6
0
2
6
0
x
3
8
0
2
2
6
x
3
4
5
1
1
5
x
2
2
0
7
0
x
3
8
0
795
30
75
80
60
460
545
435
835
90
460
495
180
815
110
Ø
1
90
Ø
2
40
Ø 80
Ø
1
20
External air flow
1. INSTALLATION OF COOKER.
The cooker is ready for use and can be connected to the chimney with the flue pipe.
If possible, connect the flue pipe, keeping it short, straight or slightly at an angle to
the chimney.
Seal the connection (heat resisting fire rope).
When fitting the legs do not drag or push the stove but lift it (the legs could break off).
Connect the external air flow by using a pipe.
National or European standards, including local standards and any fire
regulations must be complied with.
Ensure that there is sufficient air flow before burning wood.
This is particularly important in well insulated houses and those with a mechanical
ventilation system.
To ensure your chimney has the correct measurements it is possible to measure
it. Ask your chimney sweeper for advice.
Before placing the cooker into position check to see if the floor can take the weight.
When in doubt place the stove on a large slab of stone or marble to divide the
weight.
2. GENERAL FIRE SAFETY INSTRUCTIONS.
During wood burning, high temperatures are reached make it impossible to
touch the top, sides or door without using heat resisting gloves.
Children must be made aware of the dangers and kept away for the cooker
when lit.
3.
10.
Installation and operation manual for Stove model ST-1060g
Tested according to German standards: DIN EN 12815, Ö-Standard
15A and 1.+2. BimschvV., CE and Luftreinhalte-Verordnung Switzerland
.
