GlobalTime NTP Products
19
3.6
Remote dial-up maintenance
We can use the MODEM to achieve remote dial-up maintenance with the serial monitoring
port of GTT-100 network time server. In order to make it, please follow these steps:
Initially, set the MODEM to auto answer mode and connect the MODEM and a computer
serial port with a serial cable. Type the following three commands in the HyperTerminal:
atS0=1
at&W0
at&Y0
Note: The commands are case sensitive.
Then connect the MODEM and GTT-100 network time server monitoring port with a serial
cable. Then plug the telephone line. Finally, dial this number through the Hyper Terminal of
another computer with MODEM and it can be connected with the server. The configuration is
as introduced in section 3.2.
3.7
Time server logon through the web browser
To configure the server via IE browser
Enter the time server
’
s IP address in the address bar. If It displays the following screen, then
the connection is successful. The user name is
“
ntpuser
”
and the password is
“
Users
”
.
Login
