Quick Start Guide
–Sheeva64 page
10
/
16
5.
By Sheeva64 default, the system will start a router service to setup the ethernet and wifi-ap automatically.
a. Sheeva64 has two ethernet ports, we configured eth0 for WAN and eth1 for LAN, and WAN port will request IP
address through the dhcp service.
6.
b. Configured the wifi module (wlan0) to wifi access point mode, and the ssid is “sheeva64-uap-xxyy_2.4g” without
password.
(xxyy is the wifi mac addres latest 4 digits number. Ex 12:34:56:78:xx:yy)
The user can type ’ifconfig’ or ‘ls /sys/class/net’ to make sure all the network interface are exist.
