Globalsat GV-201, Руководство пользователя

Страница: 8 / 36

Chapter 1 : F
eatures and
s
peciFication
6
Power button Press the power button to turn on the GV-201, press it again to close any
open windows and turn it off (enter a standby mode).
NOTE:
The GV-201 device needs about 2 seconds to enter the standby
mode or come back to normal operating state. Thus, the power
button may not function well if you continue to press it again within
2 seconds.
Main Control
Buttons System Menu
Mute
Zoom Out (Car Navigation Only)
Zoom In (Car Navigation Only)
Volume Down
Volume Up
Status Indicator charging: yellow blinking.
charging completed: yellow.
battery low: red.
SD card slot The PC applications and map data can be stored in the SD card.
RESET button Use the stylus tip to press down the reset button through the hole to reset
the system.
Earphone jack Plug the earphone or headset to the socket, you can listen to the navigation
voice guide and enjoy your favorite MP3 music.
USB Connector Connect the GV-201 to PC via a USB cable for data transfer.
AC adapter jack Connect the external power connector by using car charger or AC Adaptor.
External
antenna
connector
For you to connect an optional MMCX-type external antenna.
Speaker Allow the MP3 and Voice Navigation to played through the built-in speaker
in the back side of the device.
Stylus You can use the stylus pen instead of your finger to tap or input on the
screen.
Detailed Hardware Functions