Globalsat GV-201, Руководство пользователя

Страница: 34 / 36

Chapter 5 : t
roubleshootinG
32
► If the GV-201 does not boot up successfully or does not function
properly:
1. Please check if the Application software is properly installed in the memory card.
2. Please check if the
SD memory card
is inserted into the SD expansion slot.
3. Please check if the
battery power
. (A red light indicates the battery power is low and needs to
be charged. An yellow light will start to blink when it is in charging status, and the yellow light
will be on when the battery is fully charged.)
4. Perform the “ Soft Reset ”. If this doesn't solve your problem, perform the “ Hard Reset ”.
(Performing a Hard Reset should solve most of the problems.)
► Soft Reset and Hard Reset:
If your GV-201 is down or it encounters an unexpected error, you can reset it. There are two types
of reset: a hard reset and a soft reset. You will need to use a stylus or pencil to press the reset
button.
Soft Reset
Pressing the reset button will restart the system retaining all the information stored on the
device�
Hard Reset
A hard reset will re-initialize the GV-201 back to the factory settings. You should not need to
use this under normal operating conditions. To start a hard reset, you need to press and hold
the reset button meanwhile pressing down the power button.
Note 1: A hard reset will delete some of the information stored on the device and revert to its
original factory settings. All data stored on the memory card, such as music files and movie
files will be retained.
Note 2: When the system has been hard reset, the screen needs to be aligned before it
can be used. The screen correction program will start automatically. Using the stylus to tap
on the cross mark in the middle of the screen. The cross mark will now move to the upper
left corner. Tap it in the center again. Repeat this for the remaining 3 corners. If this failed,
please repeat from the beginning. After all the steps are finished, touch the screen again and
the system menu will appear on the display.
► Format the memory card
It is important that your SD memory card must be formatted as FAT (not FAT32).