Instruction Manual
6
Outdoor Drinking Fountain w/ Bottle Filler
3. MOUNT PEDESTAL TO GROUND
M6 x 10 (qty 8)
•
Locate and install plumbing through ground as required.
Refer to Rough-In Guide (page 4) for proper location and
correct plumbing.
•
This unit is designed to be installed on the surface of an
existing or new concrete slab, capable of supporting 400 lbs.
Position fountain base over plumbing and
secure to ground using provided anchor
kit (H3) mounting hardware.
2. INSTALL BUBBLER
2a.
Unscrew and remove
nut and washers from
Bubbler (P1).
2b.
Locate the hole on the drinking
fountain pan surface. Align and
sandwich with the two washers
and tighten the nut to secure
the bubbler.
2c.
Bubbler is now
properly installed.
4. ATTACH BOTTLE FILLER TO PEDESTAL
Using a phillips-head screwdriver, assemble
the bottle filler to the pedestal using the
(8) M6 x 10 pan head screws (H4).
Anchor kit consists of:
- (4) M10 Nuts
- (4) M10 Lock Washers
- (4) M10 Standard Washers
- (4) M10 Anchors
H4
Pan Head Screw
Nut
Lock Washer
Standard Washer
Anchor
H3
Anchor Kit
