Index
Table of Contents
Chapter 1 Introduction ...........................................................1
1.1 Copyright Notice .................................................................. 2
1.2 About this User's Manual .......................................................2
1.3 Warning ...............................................................................2
1.4 Replacing the lithium battery .................................................3
1.5 Technical Support ................................................................ 3
1.6 Warranty ............................................................................. 4
1.7 Packing list .......................................................................... 5
1.8 Cable Kit ............................................................................. 5
1.9 Ordering Information ..........................................................
6
1.10 Specification ......................................................................7
1.11 Board dimensions .............................................................. 8
Chapter 2 Installation ............................................................
9
2.1 Board layout ........................................................................ 10
2.2 Jumpers and Connectors ...................................................... 11
Chapter 3 BIOS ......................................................................
25
3.1 BIOS Introduction ................................................................ 26
3.2 BIOS Setup ......................................................................... 26
3.3 Standard CMOS Features ..................................................... 27
3.4 Advanced BIOS Features ..................................................... 29
3.5 Advanced Chipset Features .................................................. 33
3.6 Integrated Peripherals ..........................................................36
3.8 PNP/PCI Configurations ....................................................... 45
3.9 PC Health Status ................................................................. 46
3.10 Frequency/Voltage Control ................................................. 47
3.12 Set Password .....................................................................48
3.13 Save & Exit Setup ...............................................................49
3.14 Exit Without Saving ............................................................ 49
3.15 BIOS memory map ............................................................. 50
3.16 Award BIOS Post Codes ......................................................50
Chapter 4 Appendix ...............................................................
56
4.1 I/O Map ............................................................................... 57
4.2 IRQ Map ..............................................................................58
4.3 Example of Watch Dog codes ................................................ 58
3.7 Power Management Setup ................................................... 42
3.11 Load Optimized Defaults ..................................................... 47
Introduction
1.11 Installing the Memory
To install the Memory module, locate the Memory SO-DIMM slot on the
board and perform as below:
. Adjust the socket polarizing key and the board key to the same direction.
2. Insert the board obliquely. Moreover, lay the board in parallel to the
opening at angle of 20
o
to 30
o
, and softly insert the board so as to hit the
socket bottom. Stopping insertion halfway will result in improper insertion.
3. Applying the board side notch in parallel to the socket bottom so that
the board position cannot be displaced, press the board side notch up,
and fix it to the latch portion at both socket edges. Press the board side
notch, and release the notch with a snap “click” tone, if the printed board
exceeds the latch claw head.
Latch knob
Latch claw
Latch section
Latch arm
Polarizing key
1
2
3
Procedures for board extraction
Apply the thumb nail to the latch knob at both socket edges. Forcibly widen
the latch knobs to right and left ways, and release the latch. Then draw the
board out along an angle where the board is raised.
Side notch
Key
Содержание 3308200
