globalindustrial.ca
Distribucion Industrial Globales S DE RL DE CF
052217
1
318511
Reel
Control Panel
Feed Roller
Pressure Knob
Cutting Head
(Auto Feed Cutter Unit.)
Sensor Switch
Sensor Plug
WARNING:
Please read all instructions before use and save this
manual for future reference.
•
DO NOT INSERT YOUR FINGERS INTO CUTTING
HEAD
.
•
DO NOT
place any objects in the unit that can damage
the blades.
•
DO NOT
use the unit on an unsteady surface.
•
DO NOT
use the unit in humid or dusty environment.
•
DO NOT
disassemble or modify the tape dispenser.
•
DO NOT
replace parts or move the unit when still
plugged in.
•
DO NOT
use any volatile liquids to clean the unit. Wipe
with dry cloths only.
•
DO NOT
use if the cable is damaged. This may cause
a fire or electric failure.
•
DO NOT
use power other than the set voltage labeled
on the machine.
1. Power Switch
Press to turn power ON or OFF
2. Tape Length Display
Shows tape length and error
3. Length adjustment key
The last digit indicates “mm” (0-9mm)
And the first two digits “cm” (20-990mm)
4. Reverse key
Feed roller reverse by pressing . Use this key for changing tape.
5. 20 (reset) key
Resets length display reset and back to min set length of 20mm
6. Feed key
Tape dispenses as long as
È
is pressed.
7. Cut key
Press
to cut tape.
8. Auto Key
Press AUTO to feed tape to the preset length and cuts automatically
9. Pressured knob
Adjust press (top) roller to change presser on tape.
1. Power Switch
Fuse
Instruction Manual
Manual de Instrucciones
Manuel d'instruction
Customer Service
US: 1-800-645-2986
Servicio de atención al Cliente
México: 01.800.681.6940
Service à la clientèle
Canada: 888-645-2986
ELECTRIC TAPE DISPENSER