The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet.
Revised 1/23/19
Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions.
© 2019 by Bobrick Washroom Equipment, Inc.
Technical Data
continued . . .
Round
Cap
Battery Pack
Requires 4 “D” Cell Batteries (Not included)
COUNTER-MOUNTED
SureFlo
®
AUTOMATIC
TOP-FILL BULK
LIQUID SOAP DISPENSER
B-824
MATERIALS:
Spout and Stem Assembly — Above the counter, chrome plated ABS plastic spout. Unit equipped with a spring loaded
180° rotatable lid with concealed locking mechanism for top filling. Rotatable lid mechanism consists of metal components.
Integrated to Spout are a grey plastic Dispense Tip and Activation Lens Housing. Stem connects to Bottle.
Soap Bottle — Translucent, shatter-resistant polyethylene. Capacity: 34-fl oz (1.0-L).
Pump and Soap Delivery System — A plastic Gear Pump submerged in the bottom of the Bottle, pumps the liquid soap
through a vinyl tube to spout.
Bottom Housing — Water resistant, ABS plastic housing attached to the bottom of the Bottle, houses the PC Board, motor
that drives the Gear Pump, and the Gear Pump Housing. It includes a Portion Control Knob, Flush Button to allow for system
cleaning and maintenance, a connector for the Fiber Optic cables, and Power Port.
Electronic Activation/Indication System — Pair of plastic Fiber Optic cables connects the plastic Activation Lenses to an
IR Sensor located on a PC Board in the Bottom Housing. A third plastic Fiber Optic cable connects an LED located on the
PC Board to an acrylic Lens at the tip of the Spout; a solid green LED indicates dispense activity and a red blinking LED light
indicates low battery life.
All three cables are Integrated into one Fiber Optic Connector Tip for ease of installation.
Battery Pack — Water-resistant, plastic material holds 4 Alkaline “D” Cell Batteries (not included). ANSI-134A, IEC-LR20
Designation, which includes most standard battery manufacturer’s D-Batteries.
Patented
2"
50mm Maximum
Mounting Thickness
6-3/4"
170mm
2-15/16"
75mm
3-7/8"
100mm
Dia.
2-3/4"
70mm
1-3/8"
35mm
Dia.
17"
430mm
Auto System
Flush Button
Portion
Control Knob
