Global Specialties ARX-WRL, Инструкция по эксплуатации

Страница: 20 / 36

- 20 -
This situation is shown by the blue LED. In this procedure following
operating modes are defined:
Fast flashing: Slave and Master are not connected together
Steady on: Slave and Master connected together
Slowly flashing: The Master is not connected but it has saved a
slave address. In this case you can erase the
saved address by pressing the switch.
You can chose a name for the
Bluetooth Slave module. In order
to let the system communicate
with another Bluetooth unit, the
adjustment of the baud rate and
the PIN code has been installed as
an option.
You can change these parameters
in the ‘settings’ menu on the main
page. Click on ‘settings’ in
the software to display following
contents.
The module that you want ot adjust must be in the WT dongle when
you make the changes. The changes will saved by clicking on the item
‘save settings’.
The Log protocol shows if the saving process was successful. If this
is not the case, a so-called ‘time-out’ is announced.
Please note:
The name of the Master module cannot be changed. Once you have
saved the baud rate and the PIN code, a time-out is announced. This
is normal.
Fig. 17 : Bluetooth Settings