1
Included with the Smoke Wizard
®
UltraTraceUV
®
;
(GLD0712UV) this patented solution is the only Automaker-
approved smoke-producing solution in the world. The solution’s chemistry contains
a special dye that deposits at the exact location of a leak. Will not harm automotive
systems and will perform approximately 300 tests. (12 oz. / 355 ml). (Part number is
for one 12 oz. bottle. Two bottles included with machine)
Combination Light:
(GLD043K) delivers a white light for easier smoke location, an
ultraviolet (UV) light that highlights the fluorescent dye deposited at the exact
location of a leak and red laser pointer light. Includes 3 AAA batteries and glasses.
EVAP Service Port Adaptor – standard size:
(GLD003)
Dual-Size Schrader Valve Removal/Installation Tool:
(GLD004) The Schrader valve
has a
left-hand
thread. Turn
clockwise
to remove!
Cap Plugs Kit:
(GLD005) these cap plugs are useful when sealing an intake manifold
system in order to contain the smoke in the system for proper leak testing, such as
mass airflow sensor ducting, etc
Smoke Diffuser:
(GLD006) this adapter is designed to locate leaks around doors,
windows, sunroofs and trunk compartment. The adapter allows the operator to lay
down a thick bed of smoke (from outside the vehicle) along door and window seams
in order to watch for disturbance caused by escaping airflow due to a leaking seal.
Internal pressure is created by vehicle’s HVAC set to fresh air (i.e. not recirculation)
and blower fan on high speed.
Adapter Cone:
(GLD007) for introducing smoke into the exhaust system or into any
orifice that accommodates the cone's size, such as the induction system
Adapter:
(9995545).
NOTE: This adapter, while part
of the overall kit, is not included with the Smoke
Wizard®, but instead arrives separately from SPX.
Use this adapter to introduce smoke into the
engine intake system, as illustrated.
