![Global Leak Detection GLD-40 Скачать руководство пользователя страница 16](http://html1.mh-extra.com/html/global-leak-detection/gld-40/gld-40_operators-manual_2233043016.webp)
MATERIAL SAFETY DATA SHEET
Page 2 of 4
PRODUCT NAME:
UltraTraceUV®
(Fluorescent Diagnostic Smoke® Solution)
PRODUCT PART NUMBERS:
GLD0712UV | GLD0708UV
DATE: June 25, 2011
EYES:
SKIN:
TWA ppm
TWA mg/m3
STEL ppm
STEL mg/m3
TLV/TWA ppm
TWA mg/m3
STEL ppm
STEL mg/m3
NE
NE
NE
NE
NE
NE
NE
NE
Water Spray (Fog), Foam, Dry Chemical and Carbon Dioxide.
INHALATION:
INGESTION:
Flush eyes with clean water for 15 minutes or until irritation subsides. If irritation persists, consult a physician.
NIOSH
Do not handle or store near heat, flames or strong oxidants.
PERSONAL PROTECTION
SECTION 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
Inhalation at ambient temperatures is not commonly a problem. If overcome by excessive exposure to vapors,
you should remove from exposure to well ventilated area. Some people may experience dizziness, drowsiness or nausea.
If symptoms persist, consult a physician. It is always a good measure of precaution to avoid excessive inhalation of byproduct.
RESPIRATORY PROTECTION:
EYE PROTECTION:
PROTECTIVE GLOVES:
Combustible liquid Flash Point: 335-510°F (168-265°C). Distillation Range: 550-900° F (288-482° C). LEL:0.9% UEL: 7.0%
EXTINGUISHING MEDIA:
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE:
OTHER PROTECTIVE CLOTHING OR EQUIPMENT:
HAZARDOUS COMBUSTION PRODUCTS:
Carbon Monoxide, Soot, Smoke, Carbon Dioxide.
Non-Hazardous
SECTION 4 - FIRST AID MEASURES
SECTION 5 - FIRE FIGHTING MEASURES
Do not induce vomiting
as a risk of aspiration exists with this petroleum based product. If ingested, the precaution is to call a physician and our
emergency number immediately.
Remove any contaminated clothing and wash affected skin area with soap and warm water.
SECTION 7 - HANDLING AND STORAGE
SECTION 6 - ACCIDENTAL RELEASE MEASURES
UNUSUAL FIRE AND EXPLOSION HAZARDS:
ACGIH
OSHA
HAZARDOUS COMPONENTS
GENERAL HAZARDS:
FIRE FIGHTING PROCEDURES:
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:
Do not store or mix base chemical with strong oxidants. Do not cut, drill, grind, or weld container, as this may cause explosion.
Cool exposed container with water. Use air-supplied (SCBA) breathing equipment for enclosed or confined spaces.
Recover liquid, wash remainder with suitable petroleum solvent or add absorbent. As with all petroleum products, keep out of sewers and water
courses. Advise authorities if ever any petroleum product has entered or may enter sewers or water courses
Use this product in a well ventilated area.
Wash with soap and water after using this product and before eating drinking or smoking.
Eyewash station recommended.
Safety Glasses required.
Not required.
WORK / HYGIENIC PRACTICES: