M04 - M08 Bucket Elevator
10230001 6-07
8
32
install the cables
Install the cables to the arm assemblies.
Tighten the cables (examples A/1, B/1,
and a on page 70. Install the spouts into
place.
Be certain to install the wire
rope clips following the instructions
in this manual!
Important Note:
Bottom cable(s)
should be taut enough to keep the downspout
straight. Top cables should be drawn up snug!
Truss Cables
DETAIL OF PIPE CLAMP
B
1
DETAIL OF PIPE CLAMP
A
1
3/8” x 1 1/4” bolt (900-00032)
and nut (900-05021)
1/2” pipe clamp welded
assembly (2)
3/8” cable clamp (900-31015)
3/8” cable thimble (900-31030)
downspout
3/8” cable clamp (900-31015)
3/8” cable thimble
(900-31030)
3/8” x 1 1/4” bolt (900-00032)
and nut (900-05021)
1/2 pipe clamp
welded assembly
downspout
1/2” x 6” turnbuckle (use on end
of spout with easiest access
from bin top, service platform,
ground, etc. so turnbuckle can
be adjusted.) (900-31023)
dwg.s used on this page:
k2200228
5
Assembly
the following page references on this page do not
automatically update: p70
