2
Automatic Hand Dryer
User Manual
Before installing, be sure to read this installation manual and retain for future reference.
This product must be installed by qualified personnel in accordance with the instructions given in this manual and
installation must comply with all applicable regulations, national security standards and laws in force in the country
where the product is installed.
Turn off the power at the main switch before installing or servicing the dryer unit
The dryer must not be installed on a flammable surface. Do not damage any parts of
the electrical connections.
Pre-arrange an appropriate power outlet and a system of disconnection in accordance with current local
regulations. Make sure the product is properly connected to ground. If there is no ground connection, there is a risk
of an electrical shock.
Do not install the dryer over a washbasin. If the power cord is damaged, it must be repaired by qualified personnel
to avoid any type of risk.
During use, temperatures above 158
℉
[70
℃
] may develop in the parts near the hot air nozzle. Do not touch or
cover the dryer during use or when finished using it.
GGeenneerraall ssaaffeettyy iinnffoorrm
maattiioonn::
W
WAARRNNIINNGG
This product is intended
Failure to properly ground
All units must be suppllied
for installation by a qualified service person. Use
AWG NO.12 solid conductor for wiring.
unit could result in service electrical shock and/or
death.
with a 3-wire service. The ground wire must be
connected to the dryer’s backplate.
--
NN
OTE: Do not install dryer over washbasin --
SSAAFFEETTYY W
WAARRNNIINNGGSS
Disconnect
power at the service breaker before
installing or servicing.
W
WAARRNNIINNGG
W
WAARRNNIINNGG
W
WAARRNNIINNGG
