pa
ge 6
pa
ge 7
Specifications
8" 12" 16" 20"
Model No.
244221 244222 244223 244224
Power
110V/60Hz 110V/60Hz 110V/60Hz 110V/60Hz
Watts
160W 380W 600W 730W
Seal Width
2mm 2mm 2.6mm 2.6mm
Sealing Length
7.9" 11.8" 15.7" 19.7"
Dimensions
3" X 15" x 6"
3" x 18" x 7"
3" x 22" x 7"
5" x 28" x 8"
Shipping Dimensions
14" x 8" 7"
20" x 10" x 7"
24" x 11" x 7"
32" x 10" x 7"
Weight
7-lbs 10-lbs 12-lbs 15-lbs
Electrical Circuit Diagram
heating element
transformer
microswitch
ac source
timer set
Operating
your Sealer
Assembly Instructions
Sealer comes assembled and ready to operate. No warm up
time is required.
Operation
·
Before operating, check the heating element, PTFE
cover, PTFE adhesive and the silicone rubber. The heating
element should be intact.
· Insert the power cord into the correct receptacle (110V).
· Set the timer knob to the lowest setting. Always start with a
low setting and increase gradually as needed.
· Place material to be sealed on the platform of the sealer and
bring the sealing arm down firmly, but gently. The red light will
turn off when sealing time is completed.
· When red light turns off, keep pressing the sealing arm down
for an additional 2-3 seconds. For a high-quality seal, seals
must cool under pressure. Thicker materials will require a
longer cooling (congealing) time.
Tips for Successful Sealing
· If the seal is broken or damaged, decrease the sealing time.
