· When replacing the heating elements, always replace the
PTFE adhesive under the heating element. A worn PTFE
adhesive can cause the heating element to break. The
PTFE adhesive works as a barrier between the body of the
sealer and the element. Never allow the element to come
in direct contact with the sealer body as that will damage
the timer.
pa
ge 5
pa
ge 4
SAVE THESE INSTRUCTIONS
REFER TO THEM OFTEN AND USE THEM TO INSTRUCT OTHERS.
introduction
Our hand impulse sealers are designed for sealing polybags and
other thermoplastic materials. The sealer can seal polyethylene,
polypropylene, saran, nylon, static shielding bags, and Mylar up to
10mil in total thickness.
Features
Your sealer is equipped with a wide range of standard features
and capabilities.
· Impulse sealing - no warm up time needed
· Electronic timer for variable control
· Heavy duty, all metal construction
· Table top design supported with anti-slip rubber feet
· Seal width: 2mm or 2.6mm wide flat heating element
· Option: Round heating element available for seal and cut
applications
· Manufacturer spare parts kit includes: 2 heating elements,
2 PTFE covers
How Do Hand Sealers Work?
Our impulse sealers fire a short burst of electricity through
a specially designed heating wire to weld thermoplastic
materials together. The length of the seal time will depend on
the sealing characteristics of the bag being sealed. The sealing
process is simple: The operator places material on the platform
of the sealer and brings the sealing arm down to seal.
