102 - 122
7.1
.
0
- GUIDE TO THE IDENTIFICATION OF
PROBLEMS IN THE ELECTRICAL SYSTEM
3 / 3
from
2000
to
••••
WORKSHOP MANUAL
page
3/2002
PROBLEM
CAUSE
REMEDY
10. The engine stops while in
use for reasons not due
to the safety devices cut-
ting in
The safety devices have cut in or are
faulty
Check the operation of the microswitch operation
and the relevant wiring [see 7.3 and 7,8]
Accidental detaching of an electrical
wire
Check all wiring
Starting of engine not permitted [see
summary logic table 7.2]
After checking that the conditions are met,
check all the microswitches [see 7.3] and the
relative wiring.
11. The 6.3 A fuse cuts in
Short circuit or overload on the power
side of the card (ignition block, starter
relay, headlamps and recharger con-
nector)
Find and replace the defective user [see 7.4 –
7.5 and 7.6]
Short circuit or damage to the electron-
ic card protection (power side)
Try changing the card with one that is known
to work. If the problem stops, replace the
faulty card.
<= ... RET ... <=
