3/2002
CONTENTS
1. Rules and procedures of the service centre
This chapter deals with the main aspects in the relationship between the Manufacturer and the Service Centres.
Close co-operation between the Manufacturer and Service Centres is important for best resolving problems
and for maintaining an image of efficiency and reliability to present to the Customer.
Complying with these short and simple suggestions will help us in this task, avoiding for both you and us all
those possible misunderstandings which result in a mutual waste of time.
2. General regulations
This chapter deals with general aspects of working and the main rules for ensuring that the work is done prop-
erly and maintains the machine’s safety.
3. Maintenance
This chapter deals with the criteria for routine maintenance.
4. Adjustments and tuning
This chapter deals with the adjustments to be made to remedy the more frequent performance failures, which
are usually resolved by quick checks and tunings.
5. Removal of external parts and main assemblies
For doing more difficult jobs, greater accessibility may be required. This can be done by taking the unit con-
cerned off and working at the bench, or by removing the hood and external parts.
Whether or not this will be useful is at the discretion of the mechanic’s experience.
6. Repairs
This chapter deals with all the more complex work connected with the replacement or repair of malfunctioning
or worn parts.
The descriptions must follow a logical sequence and can include operations not specifically connected to a par-
ticular type of repair.
In this case, careful reading of the entire procedure can help you omit all those operations not connected with
the case in hand without, however, overlooking anything that may be necessary.
7. Electrical system
This chapter deals with the problems and checks connected with the electrical system.
All work can be done using a tester without having to use special equipment.
The electrical diagrams can be useful to you for understanding how the system functions and to facilitate the
pinpointing of any problems.
8. Technical data
This chapter summarises all the main information regarding the machine.
102 - 122
i
.
0
- INDEX
1 / 2
from
2000
to
••••
WORKSHOP MANUAL
page
<= ... RET ... <=
