Global garden products N 102 Hy Series, Руководство по ремонту

Страница: 55 / 80

MAP
1 / 1
6.5.
0
REPLACEMENT OF THE SMALL
WHEELS FOR THE DRIVE BELT
General informations:
---
Related topics:
Drive belt adjustment [ 4.3]
Removing the ejection conveyor [ 5.3]
Tightening torques
4 Nuts for small wheels .......................... 25 ÷ 30 Nm
1 1 2
4
3
5
5a
5b
3a
3b
MODEL YEAR 2016
N…102 Hy N…102
WORKSHOP MANUAL
WORKSHOP MANUAL
• Remove the collector channel.
For greater operating convenience it is recommend-
ed that the transmission belt is slackened off; this is
done by ...
mechanical transmission models
engaging the parking brake.
hydrostatic drive models
grasping the two branches of the belt (2), pulling
it just enough to free it from the pulley throat (3),
overcoming the resistance of the tension regula-
tor guide pulley.
The two wheels (3) are held onto the frame by two
nuts (4), with a spacer in between (5).
When reassembling, there should be kept in mind
that:
– thetall spacer (5a) is to be fitted beneath the right-
hand wheel (3a);
– the short spacer (5b) is to be fitted beneath the left-
hand wheel (3b);
When reassembly is completed, tighten the nuts (4)
to the amounts shown.
At the end...
• Adjust the drive engagement.
• Refit the collector channel.
BACK