Global garden products N 102 Hy Series, Руководство по ремонту

Страница: 26 / 80

1 / 2
4.4.
0
DRIVE PEDAL ADJUSTMENT
General informations:
This operation should be carried out every time the
rear axle, the pedal or the control rod is removed in
order to get the correct travel for the pedal and to
enable reaching the envisaged speeds both for-
wards and in reverse.
Related topics:
Fitting safety microswitches [ 7.10]
1
N
2
3
4
MODEL YEAR 2016
N…102 Hy N…102
WORKSHOP MANUAL
WORKSHOP MANUAL
MAP
hydrostatic drive models only
A) Adjusting the pedal in the “neutral” position
The pedal position is to be adjusted starting with the
lever (1) of the hydrostatic unit in the “neutral” posi-
tion. This position «N» is easily recognised, since it is
held fast by a check ball.
The pedal (2) is in its best position when, with the
hydrostatic group lever (1) in “neutral”, the lower edge
of the front inclined section of the pedal itself is at 85
mm from the metal edge of the footboard (3).
This is obtained by opening the inspection hatch
beneath the seat and by turning the nuts (4) appropri-
ately until the required measurement is reached.
Take care not to accidentally modify the position of
the lever (1) during the adjustment.
B) Adjusting the “neutral” position
of the microswitch
IMPORTANT!
This is a very important adjustment for the cor-
rect operation of the safety devices for starting
and stopping of the machine during work.
The “neutral” position «N» is indicated by the micro-
BACK