5.9 RE-ASSEMBLING THE FUEL-BED - COAL MODELS
a)
Place the fuelbed base centrally on to the fuelbed support and push
fully backwards to the rear face of the fibre boards
Make sure that the
fuelbed base is located centrally in the fire box
,
behind the
retaining tabs as shown below.
Fit 7 off small coals along the front
edge of the fuelbed base as shown below in figure 4.
Fig. 4
b)
Select 4 off large coals and arrange behind the front row of coals,
ensuring that flame paths as indicated below are not interupted, see
figure 5 below.
Fig. 5
42
Position fuel-bed base behind
retaining tabs