THE ORION EX MINI-REP SYSTEM STATUS INDICATORS
AND CONTROL BUTTONS
STATUS
FIRE
LED used to indicate any FIRE ALARM condition present on panel.
FAULT
LED used to indicate any FAULT condition present on panel.
DISABLED
Disabled Status LED used to indicate that the panel has features that have been disabled in
either Access Level 2 or 3 modes.
TEST
This LED is active whenever panel is in TEST MODE. Only LIT when in Engineering Mode and
TEST mode has been selected.
SUPPLY
Multi function indicator used to indicate the presence of supply. When in Access Level 1 this
LED is permanently lit. If in Access Level 2 (enter this mode using USER CODE) this LED will flash
at a rate of once per second. And finally if in Access Level 3 mode (enter using ENGINEERING
CODE) this LED will flash faster at a rate of once every 0,5 seconds.
SYSTEM FAULT This LED will be lit whenever there is a processor failure or corruption of the panel firmware.
Manufacturers of Fire Detection Equipment
globalfire.pt
INSTALLATION MANUAL 1.0 - 06/2015
ORION EX MINI-REP
