Global Coolers TOUCHLESS TL-1, Руководство пользователя, Страница: 12 / 16

Cleaning
1. Unscrew the two screws and remove the top cover.
2. Remove the cold tank cover and separator.
3. Fill 0.6 (2L) gallons pure water into cold tank to clean it.
4. Place a large bucket beneath the drain outlet on the back of water dispenser.
5. Remove the drain cover and drain the water.
6. After draining reposition the drain cover.
7. Reposition separator and cold tank cover.
8. Ensure the pipe and wires are connected properly.
To remove mineral deposits that may have built up inside the cold tank :
1. Prepare a solution by mixing 4 liters of water with 100ml of Sanipure.
2. Unscrew the top cover and lift the cold water tank lid.
3. Put the cleaning solution into the appliance’s cold tank and make sure the water can flow out of
the hot spout.
4. Plug in the power cord and turn on the heating switch. Allow the water to heat for 10 minutes.
5. Turn off the heating switch again and allow the solution to cool down for 30 minutes.
6. Drain the solution from the drain outlet then rinse with clear water 2 or 3 times following the
above instructions.
ATTENTION : To avoid damaging the dispenser, only desassemble parts mentionned above.
Sanitizing
The machine should be disinfected with a suitable disinfectant (like Sanipure) every 6 months.
Refer to the disinfectant instructions to clean your unit and then rinse the unit following the above
instructions.
ATTENTION : In case of servicing, for your safety, always unplug the appliance.
We recommend 2 cleanings per year.
1 2