Global American 3307114, Руководство пользователя

Страница: 48 / 53

BIOS Setup Information
Code Description
48 Patterns written in base memory. Determining the amount of memory below
1MB next.
49 The amount of memory below 1MB has been found and verified.
Determining the amount of memory above 1MB memory next.
4B The amount of memory above 1MB has been found and verified. Checking
for a soft reset and clearing the memory below 1MB for the soft reset next.
If this is a power on situation, going to checkpoint 4Eh next.
4C The memory below 1MB has been cleared via a soft reset. Clearing the
memory above 1MB next.
4D The memory above 1MB has been cleared via soft reset. Saving the memory
size next. Going to checkpoint 52h next.
4E The memory test started, but not as the result of a soft reset. Displaying the
first 64KB memory size next.
4F Memory size display started. This will be updated during memory test.
Performing the sequential and random memory test next.
50 Memory testing/initialization below 1MB completed. Going to adjust
displayed memory size for relocation and shadowing.
51 The memory size display was adjusted for relocation and shadowing.
Testing the memory above 1MB next.
52 The memory above 1MB has been tested and initialized. Saving the memory
size information next.
53 The memory size information and the CPU registers are saved. Entering
real mode next.
54 Shutdown was successful. The CPU is in real mode. Disabling the Gate A20
line, parity, and the NMI next.
57 The A20 address line, parity, and the NMI are disabled. Adjusting the
memory size depending on relocation and shadowing next.
58 The memory size was adjusted for relocation and shadowing. Clearing the
Hit <DEL> message next.
59 The Hit <DEL> message is cleared. The <WAIT… > message is displayed.
Staring the DMA and interrupt controller test next.
60 The DMA page register test passed. To do DMA#1 base register test.
62 DMA#1 base register test passed. To do DMA#2 base register test.
65 DMA#2 base register test passed. To program DMA unit 1 and 2.
66 DMA unit 1 and 2 programming over. To initialize 8259 interrupt controller.
7F Extended NMI sources enabling is in progress.
80 The keyboard test has started. Clearing the output buffer and checking for
stuck keys. Issuing the keyboard reset command next.
81 A keyboard reset error or stuck key was found. Issuing the keyboard
Controller interface test command next.
82 The keyboard controller interface test completed. Writing the command byte
and initializing the circular buffer next.
83 Command byte written, Global data init done. To check for lock-key.
3307114 User’s Manual 4-24