System Installation
3-2 Main Memory
3307114 provides three DIMMs (168-pin Dual In-line Memory Module) to
support 3.3V SDRAM (Synchronized DRAM) as onboard main memory. The
maximum memory size can be up to 1GB. Auto detecting memory clock
according to BIOS CMOS settings.
For system compatibility and stability, don’t use memory module without brand.
You can also use the single or double-sided DIMM. Randomly installing DIMM
in any one of the DIMM sockets is allowed. You can install different size of
DRAM module on DIMM1, DIMM2, DIMM3 or all to make the system boot.
Watch out the contact and lock integrity of memory module with socket, it will
impact on the system reliability. Follow normal procedures to install your
DRAM module into memory socket. Before locking, make sure that all modules
have been fully inserted into the card slots.
NOTE :
(1) To maintain system stability, don’t change any of DRAM parameters in
BIOS setup to upgrade your system performance without acquiring
technical information.
3307114 User’s Manual
3-
2
