Global American 3301520, Руководство пользователя

Страница: 9 / 33

I/O Interface
I/O on Bracket
Power Supply
System Management
- Serial port: 10-pin box header x 2 (COM 2 reserved for RS-422/485
as an option)
- Disk on Module: 2-pin power connector for DOM
- USB: Eight USB2.0 ports with 480Mb/s bandwidth (4 on Board, 4 to
Backplane)
- IDE HDD: Ultra ATA100/66/33, 40 pin connector x 1
- SATA HDD: 4 Serial ATA II Ports, bandwidth: 300 MB/s (2 onboard
and 2 to backplane)
- GPIO: Support 4 sets general purpose I/O each with TTL level (5V)
interface
- Parallel port: 26-pin connector x 1
- Floppy: 34-pin connectorx1
- On board buzzer x 1
- On board 2-pin header for reset
- AC’ 97 Audio Codec, Realtek ALC655 (4 pin for Mic in, 4 pin for Line
in, and 4 pin for line out)
- 2-pin power-on button switch
- 2-pin header for SMBus 2.0 Controller
- 4-pin FAN JST connector x 1 (For CPU); 3-pin FAN connector x 2
- 5-pin for key lock/power LED/HDD Power LED
- 5-pin connector x 1 for Chassis or Backplane Front KB/ Mouse
- VGA DB-15 connector x 1
- RJ45 Gigabit Ethernet LAN port x 2
- Mini-DIN PS/2 Keyboard/mouse x 1
‹ Power source
¾ Power source from Backplane through Golden Finger
¾ Support both ATX or BTX Power Supply
¾ 4 Pins +12V Power Input Connector
‹ Power requirement (Max. Design Power, base on P4 3.8GHZ)
¾ 5V: 18A
¾ 12V: 20A
¾ 3.3V: 5A
¾ 5Vsb: 2A
‹ System monitor controller from Super I/O
‹ 8 voltage (For +1.5V, +3.3V, +5V, +12V, +1.8V, Vcore and
+5VSTBY and +3VSTBY)
‹ 2 temperature (For CPU and system)
3 FAN speed monitor (one for CPU and 2 for systems)
Real Time Clock
- On-chip RTC with battery back up
3301520 User s Manual 8 Chapter 1