6
Settings
On your phone you can set up date and time. Only after set these settings are these data
displayed in call register.
1. Place the handset next to the base.
2. With one hand press the hook switch (9) and held throughout the whole setup.
3. The other hand, press the button (
)and hold for about 3 seconds.
4. The display shows the mask to enter the date and time 1/1 0:00.
day/month hours:minutes
With buttons on button keypad (10) gradually enter the month, day, hour, minute and your
entry confirm with button
CANC
(4).
Example:
7. February 2:35 A.M.. For this entry enter in a row: 0 7 0 2 0 2 3 5 and confirm
it with button
CANC
(4).
5. After completion of setting the date and time you can release hook switch (9).
Note:
If you have active caller ID service, it is not necessary to enter the date and time via
the keypad. Date and time of your phone device is automatically updated whenever you
receive calls.